TCM-BF537 Datasheet, PDF (13/37 Pages) List of Unclassifed Manufacturers – Bluetechnix Mechatronische Systeme GmbH

2.5.2 Supply Voltage Ripple
 100mV peak to peak 0-20 MHz
2.5.3 Input Clock Frequency
 25MHz
The Blackfin Processor Input Clock frequency is 25 MHz, this frequency is derived from the on-board
crystal/oscillator and drives the Blackfin Processor’s Clock generator. This frequency is also provided on the
connector as pin 78 (CLKBUF).
2.5.4 Real Time Clock Crystal
 32.768kHz
2.5.5


Supply Current
Maximum current: 300mA at 3.3V
Typical operating conditions at 25°C environment temperature:
o Processor running at 500MHz, Core Voltage 1.2V, SDRAM 50% bandwidth utilization at 125MHz;
150mA at 3.3V
o Processor running at 250MHz, Core Voltage 0.85V SDRAM 50% bandwidth utilization at 83,3MHz; ;
Ethernet Idle: 85mA at 3.3V
2.6 Environmental Specification
2.6.1 Temperature
 Operating at full 500MHz:: -40 to + 85° C
2.6.2 Humidity
Operating: 10% to 90% (non condensing)
3 TCM-BF537C (Connector Version)
3.1 Mechanical Outline
Figure 3-1 shows the top view of the Core Module. All dimensions are given in millimeters!
TCM‐BF537 v1.x‐Hardware User Manual
13