A54SX16 Datasheet, PDF (10/57 Pages) List of Unclassifed Manufacturers – 54SX Family FPGAs

54SX Family FPGAs
3.3V/5V Operating Conditions
Absolute Maximum Ratings¹
Symbol
Parameter
Limits
Units
V_CCR2
DC Supply Voltage³ –0.3 to +6.0
V
V_CCA2
DC Supply Voltage
–0.3 to +4.0
V
V_CCI2
DC Supply Voltage
(A54SX08, A54SX16, –0.3 to +4.0 V
A54SX32)
V_CCI2
DC Supply Voltage
(A54SX16P)
–0.3 to +6.0
V
V_I
Input Voltage
–0.5 to +5.5 V
V_O
Output Voltage
–0.5 to +3.6 V
I/O Source Sink
I_IO
Current³
–30 to +5.0 mA
T_STG
Storage Temperature –65 to +150 °C
Notes:
1. Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device.
Exposure to absolute maximum rated conditions for extended
periods may affect device reliability. Device should not be
operated outside the Recommended Operating Conditions.
2. V_CCR in the A54SX16P must be greater than or equal to V_CCI
during power-up and power-down sequences and during
normal operation.
3. Device inputs are normally high impedance and draw
extremely low current. However, when input voltage is greater
than V_CC + 0.5V or less than GND – 0.5V, the internal protection
diodes will forward-bias and can draw excessive current.
Recommended Operating Conditions
Commer
Parameter
cial Industrial
Military Units
Temperature
Range¹
0 to+70
–40 to +85 –55 to +125
°C
3.3V Power
Supply
±10
±10
Tolerance
±10
%V_C
C
5.0V Power
Supply
±5
±10
Tolerance
±10
%V_C
C
Note:
1. Ambient temperature (T_A) is used for commercial and
industrial; case temperature (T_C) is used for military.
Electrical Specifications
Symbol
V_OH
V_OL
V_IL
V_IH
t_R, t_F
C_IO
I_CC
I_CC(D)
Parameter
(I_OH = -20uA) (CMOS)
(I_OH = -8mA) (TTL)
(I_OH = -6mA) (TTL)
(I_OL= 20uA) (CMOS)
(I_OL = 12mA) (TTL)
(I_OL = 8mA) (TTL)
Input Transition Time t_R, t_F
C_IO I/O Capacitance
Standby Current, I_CC
I_CC(D) I_Dynamic V_CC Supply Current
Commercial
Industrial
Min.
Max.
Min.
Max.
Units
(V_CCI – 0.1)
V_CCI
(V_CCI – 0.1)
V_CCI
2.4
V_CCI
V
2.4
V_CCI
0.10
0.50
V
0.50
0.8
0.8
V
2.0
2.0
V
50
50
ns
10
10
pF
4.0
4.0
mA
See “Evaluating Power in 54SX Devices” on page 18
10
v3.1