MDT2051 Datasheet, PDF (1/14 Pages) List of Unclassifed Manufacturers – 8-bit micro-controller uses a fully static CMOS design technology

MDT2051
1. General Description
This EPROM-Based 8-bit micro-controller uses a fully
static CMOS technology process to achieve higher
speed and smaller size with the low power
consump-tion and high noise immunity. On chip
memory incl-udes 1K words of ROM, and 68 bytes of
static RAM.
2. Features
The followings are some of the features on the
hardware and software :
u Fully CMOS static design
u 8-bit data bus
u On chip EPROM size : 1.0 K words
u Internal RAM size : 84 bytes
(68 general purpose registers, 16 special
registers)
u 37 single word instructions
u 14-bit instructions
u 8-level stacks
u Operating voltage : 2.5 V ~ 5.5 V (PRD Disable)
4.5 V ~ 5.5 V (PRD Enable)
u Operating frequency : DC ~ 20 MHz
u The most fast execution time is 200 ns under
20 MHz in all single cycle instructions except
the branch instruction
u Addressing modes include direct, indirect and
relative addressing modes
u Power-on Reset
u Power edge-detector Reset
u Power range-detector Reset
u Sleep Mode for power saving
u Four interrupt sources:
-External INT pin
-TMR0 timer
-A/D conversion completion
-PortB<7:4> interrupt on change
u A/D converter module:
-Four analog inputs multiplexed into one A/D
converter
-8-bit resolution
u 4 types of oscillator can be selected by
programming option:
RC Low cost RC oscillator
LFXT Low frequency crystal oscillator
XTAL Standard crystal oscillator
HFXT High frequency crystal oscillator
u 8-bit real time clock/counter(RTCC) with 8-bit
programmable prescaler
u On-chip RC oscillator based Watchdog
Timer(WDT)
u 13 I/O pins with their own independent
direction control
3. Applications
The application areas of this MDT2051 range from
appliance motor control and high speed automotive
to low power remote transmitters/receivers, pointing
devices, and telecommunications processors, such
as Remote controller, small instruments, chargers,
toy, automobile and PC peripheral … etc.
4. Pin Assignment
PA2/AIC2 1
PA3/AIC3 2
PA4/RTCC 3
/MCLR 4
V_ss 5
PB0/INT 6
PB1 7
PB2 8
PB3 9
18 PA1/AIC1
17 PA0/AIC0
16 OSC1
15 OSC2
14 V_dd
13 PB7
12 PB6
11 PB5
10 PB4
This specification are subject to be changed without notice. Any latest information please preview
http;//www.mdtic.com.tw
P. 1
2004/1 Ver. 1.8