HAL506 Datasheet, PDF (8/44 Pages) List of Unclassifed Manufacturers – Hall Effect Sensor Family

HAL5xx
3.6. Electrical Characteristics at T_J = –40 °C to +170 °C , V_DD = 3.8 V to 24 V, as not otherwise specified in Conditions
Typical Characteristics for T_J = 25 °C and V_DD = 12 V
Symbol
I_DD
I_DD
V_DDZ
V_OZ
Parameter
Pin No. Min.
Supply Current
1
2.3
Supply Current over
Temperature Range
1
1.6
Overvoltage Protection
at Supply
1
–
Overvoltage Protection at Output 3
–
Typ.
3
3
28.5
28
Max.
Unit
4.2
mA
5.2
mA
32
V
32
V
V_OL
Output Voltage
V_OL
Output Voltage over
Temperature Range
3
–
130
280
mV
3
–
130
400
mV
I_OH
Output Leakage Current
3
–
0.06
0.1
µA
I_OH
f_osc
f_osc
t_en(O)
t_r
Output Leakage Current over 3
Temperature Range
Internal Oscillator
–
Chopper Frequency
Internal Oscillator Chopper Fre- –
quency over Temperature Range
Enable Time of Output after
1
Setting of V_DD
Output Rise Time
3
–
–
10
µA
49
62
–
kHz
38
62
–
kHz
–
30
70
µs
–
75
400
ns
t_f
Output Fall Time
3
–
50
400
ns
R_thJSB
Thermal Resistance Junction
–
–
150
200
K/W
case
to Substrate Backside
SOT-89B
R_thJA
Thermal Resistance Junction
–
–
150
200
K/W
case
to Soldering Point
TO-92UA
1) _{B > BON + 2 mT or B < BOFF – 2 mT for HAL 50x, B > BOFF + 2 mT or B < BON – 2 mT for HAL 51x}
Conditions
T_J = 25 °C
I_DD = 25 mA, T_J = 25 °C,
t = 20 ms
I_OH = 25 mA, T_J = 25 °C,
t = 20 ms
I_OL = 20 mA, T_J = 25 °C
I_OL = 20 mA
Output switched off,
T_J = 25 °C, V_OH = 3.8 to 24 V
Output switched off,
T_J ≤150 °C, V_OH = 3.8 to 24 V
T_J = 25 °C,
V_DD = 4.5 V to 24 V
V_DD = 12 V ¹⁾
V_DD = 12 V, R_L = 820 Ohm,
C_L = 20 pF
V_DD = 12 V, R_L = 820 Ohm,
C_L = 20 pF
Fiberglass Substrate
30 mm x 10 mm x 1.5mm,
pad size see Fig. 3–3
5.0
2.0
2.0
1.0
Fig. 3–3: Recommended pad size SOT-89B
Dimensions in mm
8
Micronas