HAL506 Datasheet, PDF (4/44 Pages) List of Unclassifed Manufacturers – Hall Effect Sensor Family

HAL5xx
Unipolar Switching Sensors:
The output turns low with the magnetic south pole on the
branded side of the package and turns high if the mag-
netic field is removed. The sensor does not respond to
the magnetic north pole on the branded side.
Unipolar Switching Sensors with Inverted Output:
The output turns high with the magnetic south pole on
the branded side of the package and turns low if the
magnetic field is removed. The sensor does not respond
to the magnetic north pole on the branded side.
Unipolar Switching Sensors with Inverted Output
Sensitive to North Pole:
The output turns high with the magnetic north pole on the
branded side of the package and turns low if the magnet-
ic field is removed. The sensor does not respond to the
magnetic south pole on the branded side.
1.3. Marking Code
All Hall sensors have a marking on the package surface
(branded side). This marking includes the name of the
sensor and the temperature range.
Type
HAL501
HAL502
HAL503
HAL504
HAL505
HAL506
HAL508
HAL509
HAL516
HAL517
HAL518
HAL519
HAL523
Temperature Range
A
K
E
501A
501K
501E
502A
502K
502E
503A
503K
503E
504A
504K
504E
505A
505K
505E
506A
506K
506E
508A
508K
508E
509A
509K
509E
516A
516K
516E
517A
517K
517E
518A
518K
518E
519A
519K
519E
523A
523K
523E
1.3.1. Special Marking of Prototype Parts
Prototype parts are coded with an underscore beneath the
temperature range letter on each IC. They may be used
for lab experiments and design-ins but are not intended to
be used for qualification tests or as production parts.
1.4. Operating Junction Temperature Range
A: T_J = –40 °C to +170 °C
K: T_J = –40 °C to +140 °C
E: T_J = –40 °C to +100 °C
The Hall sensors from Micronas are specified to the chip
temperature (junction temperature T_J).
The relationship between ambient temperature (T_A) and
junction temperature is explained in section 5.1. on page
40.
1.5. Hall Sensor Package Codes
HAL XXXPA-T
Temperature Range: A, K, or E
Package: SF for SOT-89B
UA for TO-92UA
Type: 5xx
Example: HAL505UA-E
→ Type: 505
→ Package: TO-92UA
→ Temperature Range: T_J = –40 °C to +100 °C
Hall sensors are available in a wide variety of packaging
versions and quantities. For more detailed information,
please refer to the brochure: “Ordering Codes for Hall
Sensors”.
1.6. Solderability
all packages: according to IEC68-2-58
During soldering reflow processing and manual rework-
ing, a component body temperature of 260 °C should
not be exceeded.
Components stored in the original packaging should
provide a shelf life of at least 12 months, starting from the
date code printed on the labels, even in environments as
extreme as 40 °C and 90% relative humidity.
1V^DD
OUT
3
2
GND
Fig. 1–1: Pin configuration
4
Micronas