PR01 Datasheet, PDF (5/13 Pages) Vishay Siliconix – Power Metal Film Resistors

Phoenix Passive Components
Hot spot
Solder spot
Fig. 5. φ 0.60 mm FeCu – leads
Hot spot temperature rise (∆T) as a function
of dissipated power (preformed types only)
Fig. 6. φ 0.60 mm FeCu - leads
Minimum distance from resistor body to PCB =1mm
Temperature rise (∆T) at the lead end (solder spot)
as a function of dissipated power at various leads
lengths after mounting (preformed types only)
Note: The maximum permissible hot spot temperature is 205 °C
Fig. 7. Impedance as a function of applied frequency
PR01
 PHOENIX DO BRASIL LTDA
All rights are reserved . Reproduction whole or in
part is prohibited without the written consent of the copyright owner.
Revision on 2003/12/21
Page 5 of 13