CCD30-11 Datasheet, PDF (5/9 Pages) List of Unclassifed Manufacturers – Open Electrode High Performance CCD Sensor

CONNECTIONS, TYPICAL VOLTAGES AND ABSOLUTE MAXIMUM RATINGS
PIN REF
1–
2 I13
3 I12
4 I11
5 SS
6 1R
7 R13
8 R12
9 R11
10 –
11 –
12 OG
13 OS
14 OD
15 RD
16 SS
17 –
18 DD
19 SG
20 –
DESCRIPTION
No connection
Image section, phase 3 (clock pulse)
Image section, phase 2 (clock pulse)
Image section, phase 1 (clock pulse)
Substrate
Output reset pulse
Readout register, phase 3 (clock pulse)
Readout register, phase 2 (clock pulse)
Readout register, phase 1 (clock pulse)
No connection
No connection
Output gate
Output transistor source
Output drain
Reset transistor drain
Substrate
No connection
Diode drain
Spare gates
No connection
PULSE AMPLITUDE OR
DC LEVEL (V) (see note 6)
Min Typical Max
–
10
12
15
10
12
15
10
12
15
8
9.5
11
10
12
15
10
12
15
10
12
15
10
12
15
see note 7
see note 7
2
3.5
5
see note 8
27
29
31
17
18
19
8
9.5
11
–
20
22
25
0
0
V_SS+19
–
MAXIMUM RATINGS
with respect to V_SS
–
+20 V
+20 V
+20 V
–
+20 V
+20 V
+20 V
+20 V
–
–
+20 V
70.3 to +25 V
70.3 to +25 V
70.3 to +25 V
70.3 to +25 V
–
70.3 to +25 V
+20 V
–
If all voltages are set to the ‘typical’ values, operation at or close to specification should be obtained. Some adjustment within the
minimum – maximum range specified may be required to optimise performance.
Voltage between pairs of pins: OS to OD + 15 V.
Maximum current through any source or drain pin: 10 mA.
OUTPUT CIRCUIT
6923B
I13 (SEE
RD 1R NOTE 9) OD
R13 OG
OS OUTPUT
SS
SS
EXTERNAL
LOAD (SEE
NOTE 8)
0V
NOTES
6. All pulse low levels 0 + 0.5 V.
7. There is no access to the temperature sensing diodes in the back-thinned version of the CCD30-11.
8. Not critical; can be a 1 – 5 mA constant current source, or 5 – 10 kO resistor.
9. The amplifier has a DC restoration circuit, which is activated internally whenever I13 is pulsed high.
# e2v technologies
100008, page 5