STAC9721 Datasheet, PDF (37/48 Pages) List of Unclassifed Manufacturers – Stereo AC 97 Codec With Multi-Codec Option

SigmaTel, Inc.
Data Sheet
9.7 ATE Test Mode
Figure 19. ATE Test Mode
RESET#
SDATA_OUT
SDATA_IN, BIT_CLK
Toff
Tsetup2rst
Hi-Z
STAC9721
Table 29. ATE Test Mode
Parameter
Symbol
Min Typ Max
Setup to trailing edge of RESET# ToffTsetup2rst 15.0 -
-
(also applies to SYNC)
Setup to trailing edge of RESET#
Tsetup2rst 15.0 -
-
(also applies to SYNC)
Rising edge of RESET# to Hi-Z delay
Toff
-
- 25.0
Units
ns
ns
ns
Notes:
1. All AC-Link signals are normally low through the trailing edge of RESET#. Bringing SDATA_OUT high for the
trailing edge of RESET# causes STAC9721/23’s AC-Link outputs to go high impedance which is suitable for
ATE in circuit testing.
2. Once either of the two test modes have been entered, the STAC9721/23 must be issued another RESET# with all
AC-Link signals low to return to the normal operating mode.
# denotes active low.
37
04/07/00
04/07/00