MC73110 Datasheet, PDF (35/40 Pages) List of Unclassifed Manufacturers – Advanced 3-Phase Motor Control IC

Here is a summary of the connector types expected for these 7 connectors:
MC73110 Electrical Reference
5
Connector Signal type
J1
High power
J2
Low power
digital & analog
J3
Low power digital
J4
High power
J5
Low power
digital & analog
J6
Low power
digital & analog
J7
Low power digital
# pins
2
14
5
3
16
12
9
Type
Through-hole terminal block (screw connection)
Side-facing single row shrouded header
(1-in-line 0.100” pitch friction lock header)
1-in-line 0.100” pitch header
Through-hole terminal block (screw connection)
8 x 2 vertical header (2mm pitich)
Side-facing single row shrouded header
(1-in-line 0.100” pitch friction lock header)
Side-facing D-sub 9 (female)
5.2.1 Power Connector (J1)
The power connector provides power to the card. All other voltages used by the card are derived from this central
supply using an on-card DC-DC converter. The voltage provided at these connections matches the voltage at
which the motor will be driven.
Pin #
1
2
Signal
name
V+
PowerGnd
Description
18 - 48V. Current capacity specification should be
maximum motor drive + 1amp (to power the card)
Ground return for V+
MC73110 Developer’s Kit Manual
35