240128-06 Datasheet, PDF (22/32 Pages) List of Unclassifed Manufacturers – 240 x 128 Dot Graphic LCD Assembly With T6963C Toshiba Graphic LCD Controller EL Panel & LED Backlight Assembly

SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 240128-06
● Data Read Write
Code
11000000
11000001
11000010
11000011
11000100
11000101
Hex
Function
C0H Data write and ADP increment
C1H Data read and ADP increment
C2H Data write and ADP decrement
C3H Data read and ADP decrement
C4H Data write and ADP non-variable
C5H Data read and ADP non-variable
Operand
Data
---
Data
---
Data
---
This command is used for data write from MPU to external display RAM, and data read from external display RAM
to MPU. Data write/data read should be executed after setting address by address pointer set command. Address pointer can be
automatically increment or decrement by setting this command.
Note : This command is necessary for each 1 byte data. Please refer following flow chart.
DATA WRITE START
DATA READ
STATUS CHECK 1
ADDRESS POINTER SET
LOWER ADDRESS DATA
STATUS CHECK 1
STATUS CHECK 1
DATA READ C1H
UPPER ADDRESS DATA
END
STATUS CHECK 1
ADDRESS POINTER SET 24H
STATUS CHECK 1
WRITE DATA SET
STATUS CHECK 1
DATA WRITE C0H
END
Pacific Display Devices
03.07.2006
22