240128-06 Datasheet, PDF (21/32 Pages) List of Unclassifed Manufacturers – 240 x 128 Dot Graphic LCD Assembly With T6963C Toshiba Graphic LCD Controller EL Panel & LED Backlight Assembly

SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 240128-06
● Data Auto Read/Write
Code
10110000
10110001
10110010
Hex
Function
Operand
B0H Data auto write set
---
B1H Data auto read set
---
B2H
Auto reset
---
This command is convenient to send full screen data from external display RAM. After setting auto mode, "Data write
(or read)" command is not necessary between each data. "Data auto write (or read)" command should follow the "Address
pointer set" and address pointer is automatically increment by + 1 after each data. After sending (or receiving) all data "Auto
reset" is necessary to return normal operation because all data is regarded "Display data" and no command can be accepted in
the auto mode.
Note : Status check for auto mode (STA2,STA3) should be checked between each data. Auto reset should be performed after
checking STA3=1 (STA2=1). Please refer following flow chart.
AUTO MODE
STATUS CHECK 1
LOWER ADDRESS DATA
STATUS CHECK 1
STATUS CHECK 1
UPPER ADDRESS DATA
STATUS CHECK 1
STA0=1,
STA2=1? NO
YES
RETURN
ADDRESS POINTER SET 24H
STATUS CHECK 1
DATA AUTO WRITE B0H
STATUS CHECK 2
DISPLAY DATA SEND
STATUS CHECK 2
STATUS CHECK 2
STA2=1,
(STA3=1)? NO
YES
RETURN
DISPLAY DATA SEND
STATUS CHECK 2
AUTO RESET B2H
END
Pacific Display Devices
03.07.2006
21