240128-06 Datasheet, PDF (14/32 Pages) List of Unclassifed Manufacturers – 240 x 128 Dot Graphic LCD Assembly With T6963C Toshiba Graphic LCD Controller EL Panel & LED Backlight Assembly

SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
●
In T6963C, the data have been set and command executes.
The order of procedure of command sending
1. The case of 1 data
2. The case of 2 data
COMMAND SENDING
COMMAND SENDING
MODEL NO: 240128-06
STATUS CHECK
STATUS CHECK
DATA WRITE
DATA WRITE
STATUS CHECK
STATUS CHECK
COMMAND WRITE
DATA WRITE
END
STATUS CHECK
COMMAND WRITE
Note : In case of over 2 data sending, the last data (or last 2 data) is valid.
END
■ Description of Command
● Register Set
Code
Hex
00100001 21H
00100010 22H
00100100 24H
Function
Cursor Pointer Set
Offset Register Set
Address Pointer Set
D1
X ADRS
Data
Low ADRS
D2
Y ADRS
00H
High ADRS
(1) Cursor Pointer Set
The position of cursor is specified by X ADRS, Y ADRS. The cursor position is moved only by this command. The
cursor pointer doesn’t have the function of increment and decrement. The shift of cursor are set by this command. X ADRS, Y
ADRS are specified following.
X ADRS
00H~4FH (Lower 7bits are valid)
Y ADRS
00H~1FH (Lower 5bits are valid)
1 screen drive
X ADRS 00~4FH
Y ADRS 00H~0FH
2 screens drive
X ADRS 00~4FH
Y ADRS 00H~0FH
Upper screen
Y ADRS 10H~1FH
Lower screen
Pacific Display Devices
03.07.2006
14