COIC5130A Datasheet, PDF (20/20 Pages) List of Unclassifed Manufacturers – Programmable Reed-Solomon Error Correction Encoder and Decoder

COic5130A Specifications
19
Packaging
Table 6: PLCC Dimensions
D
D1
D3
E3 E1 E
e
Co^~Optic
C
θ = 0° – 7°
A
A2
A1
0.1
Index Corner
Pin 1
b
L
G
Notes:
1. Pin 1 indicator may be a corner chamfer, dot or both.
2. Controlling dimensions are in millimeters.
3. The top package body size may be smaller than the bottom package
body size by a max. of 0.15 mm.
4. Dimension D1 and E1 do not include mold protrusion. Allowable pro-
trusion is 0.25mm per side. D1 and E1 are maximum plastic body size
dimensions including mold mismatch.
5. Dimension b does not include dambar protrusion. Allowable dambar
protrusion shall not cause the lead width to exceed the maximum b
dimension by more than 0.08 mm.
6. Coplanarity, measured at seating plane G, to be 0.10 mm max.
Part Numbers: Complete ordering code COic5130A
Parts are packaged in anti static tubes of 18 units each.
To order call 650-321-3390, fax [phone],
or email [e-mail]
Symbol
Control Dimensions
in millimeters
Min Nominal Max
Alternate Dimensions
in inches
Min Nominal Max
A 3.45
A1 0.25
4.10 0.136
0.161
0.50 0.010
0.020
A2 3.20
3.60 0.126
0.142
D 30.95
31.45 1.219
1.238
D1 27.80
28.20 1.094
1.110
D3
24.80 Ref.
E 30.95
31.45
E1 27.80
28.20
E3
24.80 Ref.
L
0.73
1.03
e
0.80 BSC.
b
0.30
0.45
0.976 Ref.
1.219
1.238
1.094
1.110
0.976 Ref.
0.029
0.041
0.031 BSC.
0.012
0.018
c
0.11
0.23 0.004
0.009
Pin Features
N
128
ND
32
NE
32
Note
Square