COIC5130A Datasheet, PDF (1/20 Pages) List of Unclassifed Manufacturers – Programmable Reed-Solomon Error Correction Encoder and Decoder

COic5130A
Specifications
t = 0 to 10, 320Mbs,
Programmable Reed-Solomon
Error Correction Encoder and Decoder
For information on separate encoder refer to the COic5127A data sheet.
For information on separate decoder refer to the COiC5128A data sheet.
Preliminary Device Specification
Introduction
The COic5130A contains both a high data rate programmable
Reed-Solomon encoder and a separate decoder that will process
blocks of up to 255 eight bit symbols to provide corrections (T) of
up to 10 errors per code block at data rates up to 320 Mbs. The
encoder output code block will contain the unaltered original data
symbols followed by the generated parity symbols. The decoder
input will contain the received data symbols including errors that
may be introduced during transmission. Decoder output will be a
completely corrected block or will be marked as non-correctable
and the block will be outputted as received without any changes.
The encoder and decoder can be operated independent of each
other. Either or both may active at one time. As the devices have
separate clocks, the encoder and decoder may operate at different
data rates.
The 128-pin mqfp device is manufactured using an 0.5micron
CMOS technology by a ISO 9000 certified facility. This part is
functionally compatible with the COic5125A, COic5126A,
COic5127A and COic5128A and also the AMPEX 1295125-01 and
1295126, but includes features not found in the Ampex devices.
Co^~Optic
1742 Sand Hill Road, Suite 303, Palo Alto, CA 94304 s Tel: [phone] s Fax: [phone] s Email: [e-mail] s Web: www.co-optic.com
©1998, Co-Optic, Inc. All rights reserved. Specifications subject to change without notice.