T-51513-D104U-FW-A-AB Datasheet, PDF (19/19 Pages) List of Unclassifed Manufacturers – LCD Module Technical Specification

b. Please do not leave the LCDs in the environment of low temperature; below -20°C.
(5) SAFETY PRECAUTIONS
a. When you waste damaged or unnecessary LCDs, it is recommended to crush LCDs into
pieces and wash them off with solvents such as acetone and ethanol, which should later be
burned.
b. If any liquid leaks out of a damaged glass cell and comes in contact with the hands, wash off
thoroughly with soap and water.
c. Be sure to turn off the power supply when inserting or disconnecting the cable.
d. Inverter should be designed carefully so as not to keep working in case of detecting over
current or open circuit on the lamp.
(6) OTHERS
a. A strong incident light into LCD panel might cause display characteristics changing inferior
because of polarizer film, color filter, and other materials becoming inferior. Please do not
expose LCD module direct sunlight and strong UV rays.
b. Please pay attention to a panel side of LCD module not to contact with other materials in
preserving it alone.
c. For the packaging box, please pay attention to the followings;
(a) Packaging box and inner case for LCD are designed to protect the LCDs from the
damage or scratching during transportation. Please do not open except picking LCDs up
from the box.
(b) Please do not pile them up more than 5 boxes. (They are not designed so.) And please do
not turn over.
(c) Please handle packaging box with care not to give them sudden shock and vibrations.
And also please do not throw them up.
(d) Packaging box and inner case for LCDs are made of cardboard. So please pay attention
not to get them wet. (Such like keeping them in high humidity or wet place can occur
getting them wet.)
T-51513-D104U-FW-A-AB (AB) No. 2002-0186
OPTREX CORPORATION
Page 20/37