D4DS Datasheet, PDF (10/12 Pages) List of Unclassifed Manufacturers – Safety-Door Switch

886-3-5753170
86-755-83289224
Http://www.100y.com.tw
D4DS
J MOUNTING
Tightening Torque
Be sure to tighten each screw to the appropriate tightening
torque as shown below.
Mounting
Switch
Two, M4 Allen-head bolts with washers must be used in order to
mount the D4DS securely. To mount the D4DS more securely,
prepare two, 4 ^--0.05/_--0.15 dia. protruding portions with 4.8 mm
maximum in height each as shown below and support the D4DS
at a total of four points.
3
Mounting Dimensions with Protruding Portions
5
Standard Model
4
1
2
6
4
--0.05
--0.15
dia.
height,
4.8
max.
Two-Conduit Model
7
No.
Type
Torque
1
Terminal screw
0.59 to 0.78 N S m
2
Cover mounting screw 0.78 to 0.88 N S m
3
Head mounting screw
0.78 to 0.88 N S m
4
M4 switch mounting bolt 0.49 to 0.69 N S m
(see note 1)
5
Operation Key mounting 2.35 to 2.75 N S m
screw
6
Connector
1.77 to 2.16 N S m
1.37 to 1.77 N S m
(see note 2)
7
Cap screw
1.27 to 1.67 N S m
Note: 1. Tighten each screw with a washer and use the ap-
propriate tightening torque.
2. This force range applies to 1/2-14NPT.
4
--0.05
--0.15
dia.
height,
4.8
max.
Mounting hole
Mounting surface
Insertion hole for protrusions
4
--0.05
--0.15
dia.
height,
4.8
max.
11