|
VS1011 Datasheet, PDF (1/43 Pages) List of Unclassifed Manufacturers – MP3 AUDIO CODEC | |||
|
VS1011 PRELIMINARY
VS1011
VS1011 - MP3 AUDIO CODEC
Features
⢠Decodes MPEG 1 & 2 audio layer 3 (ISO
11172-3), WAV and PCM ï¬les
⢠Supports VBR (variable bitrate) for MP3
⢠Stream support
⢠Can be used as a slave co-processor
⢠Operates with single clock 12.288..14 MHz
or 24.576..28 MHz.
⢠Low-power operation
⢠High-quality stereo DAC with no phase er-
ror between channels
⢠Stereo earphone driver capable of driving a
30⦠load
⢠Separate 2.5 .. 3.6V operating voltages for
analog and digital
⢠5.5 KiB On-chip RAM for user code / data
⢠Serial control and data interfaces
⢠New functions may be added with software
and 4 GPIO pins
Description
VS1011 is a single-chip MP3 audio decoder. The
chip contains a high-performance, low-power DSP
processor core VS DSP4, working memory, 5 KiB
instruction RAM and 0.5 KiB data RAM for user
applications, serial control and input data inter-
faces, 4 general purpose I/O pins, as well as a
high-quality variable-sample-rate stereo DAC, fol-
lowed by an earphone ampliï¬er and a ground buffer.
VS1011 receives its input bitstream through a se-
rial input bus, which it listens to as a system slave.
The input stream is decoded and passed through a
digital volume control to an 18-bit oversampling,
multi-bit, sigma-delta DAC. The decoding is con-
trolled via a serial control bus. In addition to the
basic decoding, it is possible to add application
speciï¬c features, like DSP effects, to the user RAM
memory.
VS1011
GPIO
GPIO
4
Stereo
DAC
DREQ
SO
SI
SCLK
XCS
XDCS
Serial
Data/
Control
Interface
VSDSP4
Instruction
RAM
Instruction
ROM
Stereo Earâ
phone Driver
X ROM
audio
L
R
output
X RAM
Y ROM
Y RAM
Version 0.71, 2004-07-20
1
|
▷ |