ES3210 Datasheet, PDF (4/4 Pages) ESS Technology,Inc – Video CD Processor Product Brief

MECHANICAL DIMENSIONS
Figure 2 shows the mechanical dimensions of the ES3210
package.
D
D1
ES3210 PRODUCT BRIEF
MECHANICAL DIMENSIONS
E E1
ES3210
A2
A1
e
e1
L
b
L1
Symbol
D
D1
E
E1
A1
A2
b
e
e1
L
L1
-
-
-
-
-
-
1
Description
Lead to lead, X-axis
Package’s outside, X-axis
Lead to lead, Y-axis
Package’s outside, Y-axis
Board standoff
Package thickness
Lead width
Lead pitch
Lead gap
Foot length
Lead length
Foot angle
Coplanarity
Leads in X-axis
Leads in Y-axis
Total leads
Package type
Min
23.65
19.90
17.65
13.90
0.10
2.57
0.20
-
0.24
0.65
1.88
0°
-
-
-
-
-
Millimeters
Nom
23.90
20.00
17.90
14.00
0.25
2.71
0.30
0.65
-
0.80
1.95
-
-
30
20
100
PQFP
Figure 2 ES3210 Mechanical Dimensions
ORDERING INFORMATION
Part Number
ES3210
Description
Video CD processor
Package
100-pin PQFP
Max
24.15
20.10
18.15
14.10
0.36
2.87
0.40
-
-
0.95
2.02
7°
0.102
-
-
-
-
A
ESS Technology, Inc.
48401 Fremont Blvd.
Fremont, CA 94538
Tel: 510 - 492-1088
Fax: 510 - 492-1098
4
No part of this publication may be reproduced, stored in a
retrieval system, transmitted, or translated in any form or
by any means, electronic, mechanical, manual, optical, or
otherwise, without the prior written permission of ESS
Technology, Inc.
ESS Technology, Inc. makes no representations or
warranties regarding the content of this document.
All specifications are subject to change without prior
notice.
ESS Technology, Inc. assumes no responsibility for any
errors contained herein.
(P) U.S. Patent 4,214,125 and others, other patents
pending.
VideoDrive^® is a registered trademark of ESS Technology,
Inc.
All other trademarks are owned by their respective
holders and are used for identification purposes only.
© 1997-2001 ESS Technology, Inc. All rights reserved
SAM0417-051701