M24L216128DA Datasheet, PDF (1/14 Pages) Elite Semiconductor Memory Technology Inc. – 2-Mbit (128K x 16) Pseudo Static RAM

ESMT
PSRAM
Features
‧Advanced low-power architecture
• High speed: 55 ns, 70 ns
• Wide voltage range: 2.7V to 3.6V
• Typical active current: 1 mA @ f = 1 MHz
• Low standby power
• Automatic power-down when deselected
Logic Block Diagram
M24L216128DA
2-Mbit (128K x 16)
Pseudo Static RAM
Functional Description
The M24L216128DA is a high-performance CMOS pseudo
static RAM (PSRAM) organized as 128K words by 16 bits that
supports an asynchronous memory interface. This device
features advanced circuit design to provide ultra-low active
current. This is ideal for portable applications such as cellular
telephones. The device can be put into standby mode,
reducing power consumption dramatically when deselected
( CE1 HIGH, CE2 LOW or both BHE and BLE are HIGH).
The input/output pins(I/O₀ through I/O₁₅) are placed in a
high-impedance state when the chip is deselected ( CE1
HIGH, CE2 LOW) or OE is deasserted HIGH), or during a
write operation (Chip Enabled and Write Enable WE LOW).
Reading from the device is accomplished by asserting the
Chip Enables ( CE1 LOW and CE2 HIGH) and Output Enable
(OE) LOW while forcing the Write Enable ( WE ) HIGH. If Byte
Low Enable ( BLE ) is LOW, then data from the memory
location specified by the address pins will appear on I/O₀ to
I/O₇. If Byte High Enable ( BHE ) is LOW, then data from
memory will appear on I/O₈ to I/O₁₅. Seethe Truth Table for a
complete description of read and write modes.
Elite Semiconductor Memory Technology Inc.
Publication Date : Jul. 2008
Revision : 1.2
1/14