EN25S80A Datasheet, PDF (66/66 Pages) Eon Silicon Solution Inc. – 8 Megabit 1.8V Serial Flash Memory with 4Kbyte Uniform Sector

Revisions List
EN25S80A
Revision No Description
Date
A
Initial Release
2011/09/06
B
Update Table 20. t_CH and t_CL (min.) from 6ns to 4.5ns on page 56.
2011/10/19
1. Remove the Fast Read Burst (0Dh) command.
2. Update the Serial Flash Discoverable Parameters (SFDP) table on
page 48, 49, 50, 51and 52.
C
3. Update the Table 16. DC Characteristics I_CC1: Standby current ^2011/11/15
(max.) from 10uA to 20uA on page 55.
4. Update the Table 18. AC Characteristics on page 56.
1. Supplement the description of suspend and resume latency timing
on page 34, 35, 36 and 37.
D
2.
Update the Serial Flash Discoverable
page 48, 49, 50, 51and 52.
Parameters
(SFDP)
table
on
2011/12/06
3. Update Table 16. DC Characteristics on page 55.
4. Update Table 18. AC Characteristics on page 56.
E
Update Unique ID Number from 64 bits to 96 bits on page 53.
2012/01/13
F
Remove 32KB blocks and relative description
2012/02/21
1. Revise the typo for Table 9. Parameter ID (0) (Advanced Information)
G
2.
5/9 on
Revise
page 51.
backside
photo
for
VDFN8
(D2xE2:
3.40x4.00
mm)
on
page
2012/06/14
61.
1. Add 8 pins SOP 150mil and 8 pins SOP 200mil package options.
H
2. Change spec from 80Mhz to 104Mhz for all read commands.
3. Update Table 16. DC Characteristics on page 55
2012/06/25
4. Update Table 18. AC Characteristics on page 56.
1. Add Figure 5.2 Software Reset Recovery on page 14.
I
2. Update Table 13. Parameter ID (0) (Advanced Information) 8/9 on 2012/10/05
page 52.
1. Add 8-pin USON (4x3mm) package option.
2. Remove WPDIS bit function.
J
3. Update Table 19. DATA RETENTION and ENDURANCE on page 59. 2014/01/20
4. Update Ordering Information “ P = RoHS, Halogen-Free and REACH
compliant “ on page 65.
This Data Sheet may be revised by subsequent versions
66
or modifications due to changes in technical specifications.
©2014 Eon Silicon Solution, Inc.,
Rev. J, Issue Date: 2014/01/20
www.eonssi.com