EN25F32 Datasheet, PDF (29/40 Pages) Eon Silicon Solution Inc. – 32 Megabit Serial Flash Memory with 4Kbytes Uniform Sector

EN25F32
Power-up Timing
Figure 20. Enter OTP Mode
Figure 21. Power-up Timing
Table 8. Power-Up Timing and Write Inhibit Threshold
Symbol
Parameter
t_VSL⁽¹⁾
V_CC(min) to CS# low
t_PUW^{(1) Time delay to Write instruction}
VWI(1) ^{Write Inhibit Voltage}
Note:
1.The parameters are characterized only.
2. VCC (max.) is 3.6V and VCC (min.) is 2.7V
Min.
10
1
1
Max. Unit
µs
10
ms
2 .5
V
INITIAL DELIVERY STATE
The device is delivered with the memory array erased: all bits are set to 1 (each byte contains FFh). The
Status Register contains 00h (all Status Register bits are 0).
This Data Sheet may be revised by subsequent versions
29 ^{©2004 Eon Silicon Solution, Inc.,}
or modifications due to changes in technical specifications.
Rev. G, Issue Date: 2009/10/16
www.eonssi.com