English
Language : 

EN25Q128 Datasheet, PDF (15/57 Pages) Eon Silicon Solution Inc. – 128 Megabit Serial Flash Memory with 4Kbyte Uniform Sector
Table 4A. Instruction Set
EN25Q128
Instruction Name
Byte 1
Code
Byte 2
Byte 3
EQPI
38h
RSTQIO(2)
FFh
RSTEN
66h
RST(1)
99h
Write Enable
06h
Write Disable / Exit
OTP mode
04h
Read Status
Register
05h
Write Status
Register
01h
Page Program
02h
Sector Erase / OTP
erase
20h
Block Erase
D8h
(S7-S0)(3)
S7-S0
A23-A16 A15-A8
A23-A16 A15-A8
A23-A16 A15-A8
Chip Erase
C7h/ 60h
Deep Power-down B9h
Release from Deep
Power-down, and
read Device ID
ABh
Release from Deep
Power-down
Manufacturer/
Device ID
90h
Read Identification 9Fh
Enter OTP mode
3Ah
dummy
dummy
dummy
(M7-M0)
dummy
(ID15-ID8)
Byte 4 Byte 5
A7-A0
A7-A0
A7-A0
D7-D0
dummy (ID7-ID0)
00h
01h
(ID7-ID0)
(M7-M0)
(ID7-ID0)
(7)
Byte 6 n-Bytes
continuous(4)
Next byte continuous
(5)
(ID7-ID0) (6)
(M7-M0)
Notes:
1. RST command only executed if RSTEN command is executed first. Any intervening command will disable Reset.
2. Device accepts eight-clocks command in Standard SPI mode, or two-clocks command in Quad SPI mode
3. Data bytes are shifted with Most Significant Bit first. Byte fields with data in parenthesis “( )” indicate data being read from the
device on the DO pin
4. The Status Register contents will repeat continuously until CS# terminate the instruction
5. The Device ID will repeat continuously until CS# terminates the instruction
6. The Manufacturer ID and Device ID bytes will repeat continuously until CS# terminates the instruction.
00h on Byte 4 starts with MID and alternate with DID, 01h on Byte 4 starts with DID and alternate with MID
7. (M7-M0) : Manufacturer, (ID15-ID8) : Memory Type, (ID7-ID0) : Memory Capacity
This Data Sheet may be revised by subsequent versions
15
or modifications due to changes in technical specifications.
©2004 Eon Silicon Solution, Inc.,
Rev. J, Issue Date: 2011/09/19
www.eonssi.com