ZXTC6717MC_15 Datasheet, PDF (1/9 Pages) Diodes Incorporated – COMPLEMENTARY 15V NPN & 12V PNP LOW SATURATION TRANSISTOR

A Product Line of
Diodes Incorporated
ZXTC6717MC
COMPLEMENTARY 15V NPN & 12V PNP LOW SATURATION TRANSISTOR
Features
NPN Transistor
• BV_CEO > 15V
• I_C = 4.5A Continuous Collector Current
• Low Saturation Voltage (100mV max @ 1A)
• R_SAT = 45mΩ for a low equivalent On-Resistance
PNP Transistor
• BV_CEO > -12V
• I_C = -4A Continuous Collector Current
• Low Saturation Voltage (-140mV max @ -1A)
• R_SAT = 60mΩ for a low equivalent On-Resistance
• h_FE characterized up to 12A for high current gain hold up
• Low profile 0.8mm high package for thin applications
• R_θJA efficient, 40% lower than SOT26
• 6mm² footprint, 50% smaller than TSOP6 and SOT26
• Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
• Qualified to AEC-Q101 Standards for High Reliability
• PPAP capable (Note 4)
Mechanical Data
• Case: W-DFN3020-8 Type B
• Nominal package height: 0.8mm
• Case material: molded plastic. “Green” molding compound.
• UL Flammability Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Finish - NiPdAu, Solderable per MIL-STD-202,
Method 208 e4
• Weight: 0.013 grams (approximate)
Applications
• DC – DC Converters
• Charging circuits
• Power switches
• Motor control
• LED Backlighting circuits
• Portable applications
W-DFN3020-8
Type B
C1
C2
B1
B2
C2 C2 C1 C1
C2
C1
Top View
Bottom View
E1
NPN Transistor
E2
PNP Transistor
E2 B2 E1 B1
Pin 1
Bottom View
Pin-Out
Ordering Information (Note 4 & 5)
Product
ZXTC6717MCTA
ZXTC6717MCQTA
Compliance
AEC-Q101
Automotive
Marking
DA1
DA1
Reel size (inches)
7
7
Tape width (mm)
8
8
Quantity per reel
3,000
3,000
Notes:
1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally
the same, except where specified.
5. For packaging details, go to our website at http://www.diodes.com
Marking Information
DA1
DA1 = Product type Marking Code
Dot denotes Pin 1
ZXTC6717MC
Document number: DS31926 Rev. 4 - 2
1 of 9
www.diodes.com
October 2012
© Diodes Incorporated