DS1248 Datasheet, PDF (19/21 Pages) Dallas Semiconductor – 1024k NV SRAM with Phantom Clock

DS1248P
DS1248/DS1248P
PKG
DIM
A
B
C
D
E
F
G
MIN
0.920
0.980
-
0.052
0.048
0.015
0.025
INCHES
NOM MAX
0.925 0.930
0.985 0.990
-
0.080
0.055 0.058
0.050 0.052
0.020 0.025
0.027 0.030
Note: Dallas Semiconductor recommends that PowerCap Module bases experience one pass through
solder reflow oriented with the label side up (“live-bug”).
Hand soldering and touch-up: Do not touch or apply the soldering iron to leads for more than three
seconds.
To solder, apply flux to the pad, heat the lead frame pad, and apply solder. To remove the part, apply flux,
heat the lead frame pad until the solder reflows, and use a solder wick to remove solder.
19 of 21