DS1110 Datasheet, PDF (1/8 Pages) Dallas Semiconductor – 10-Tap Silicon Delay Line

Rev 1; 11/03
10-Tap Silicon Delay Line
General Description
The DS1110 delay line is an improved replacement for
the DS1010. It has ten equally spaced taps providing
delays from 5ns to 500ns. The devices are offered in a
standard 16-pin SO or 14-pin TSSOP. The DS1110 series
delay lines provide a nominal accuracy of ±5% or ±2ns,
whichever is greater, at 5V and +25°C. The DS1110
reproduces the input logic state at the tap 10 output after
a fixed delay as specified by the dash number extension
of the part number. The DS1110 is designed to produce
both leading- and trailing-edge delays with equal preci-
sion. Each tap is capable of driving up to ten 74LS type
loads. Dallas Semiconductor can customize standard
products to meet special needs.
Applications
Communications Equipment
Medical Devices
Automated Test Equipment
PC Peripheral Devices
Features
♦ All-Silicon, 5V, 10-Tap Delay Line
♦ Improved, Drop-In Replacement for the DS1010
♦ 10 Taps Equally Spaced
♦ Delays are Stable and Precise
♦ Leading- and Trailing-Edge Accuracy
♦ Delay Tolerance ±5% or ±2ns, whichever is
Greater, at 5V and +25°C
♦ Economical
♦ Auto-Insertable, Low Profile
♦ Low-Power CMOS
♦ TTL/CMOS Compatible
♦ Vapor Phase, IR, and Wave Solderable
♦ Fast-Turn Prototypes
♦ Delays Specified Over Commercial and Industrial
Temperature Ranges
♦ Custom Delays Available
♦ Standard 16-Pin SO or 14-Pin TSSOP
Pin Configurations
TOP VIEW
IN 1
N.C. 2
TAP2 3
TAP4 4
TAP6 5
TAP8 6
GND 7
DS1110E
14 V_CC
13 TAP1
12 TAP3
11 TAP5
10 TAP7
9 TAP9
8 TAP10
TSSOP
Pin Configurations continued at end of data sheet.
Ordering Information
PART
DS1110E-XXX
DS1110S-XXX
TEMP RANGE
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
14 TSSOP
16 SO
Selector Guide appears at end of data sheet.
_____________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.