MB39C601 Datasheet, PDF (6/37 Pages) Cypress Semiconductor – High power factor in single conversion

MB39C601
5. Recommended Operating Conditions
Parameter
Symbol
Condition
Min
VDD pin input voltage
VDD VDD pin
9
VCG pin input voltage
VCG
VCG pin (from low-impedance
source)
9
VCG pin input current
IVCG
VCG pin (from high-impedance
source)
10
OTM pin
Shutdown/retry mode
10
OTM pin ground resistance
ROTM
OTM pin
Latch-off mode
150
PCL pin ground resistance
RPCL
PCL pin
24.3
TZE pin connection
resistance
RTZE1
TZE pin
Auxiliary winding connection resistor
50
VCG pin grounded capacity
CVCG
VCG pin
33
VDD pin bypass capacity
CBP
Ceramic capacitor value to set
between VDD and GND pin
0.1
Operating ambient
temperature
Ta
-
-40
Value
Typ
-
-
-
-
-
-
-
-
-
+25
Unit
Max
20
V
13
V
2000
µA
100
kΩ
750
kΩ
200.0
kΩ
200
kΩ
200
nF
1.0
µF
+85
°C
WARNING:
The recommended operating conditions are required in order to ensure the normal operation of the semiconductor device. All of
the device's electrical characteristics are warranted when the device is operated under these conditions.
Any use of semiconductor devices will be under their recommended operating condition.
Operation under any conditions other than these conditions may adversely affect reliability of device and could result
in device failure.
No warranty is made with respect to any use, operating conditions or combinations not represented on this data
sheet. If you are considering application under any conditions other than listed herein, please contact sales
representatives beforehand.
Document Number: 002-08393 Rev.*A
Page 6 of 37