CY8CMBR2110 Datasheet, PDF (42/68 Pages) Cypress Semiconductor – CapSense® Express™ 10-Button Controller

CY8CMBR2110
2.1 HOST_MODE
Host Mode register
Individual Register Names and Addresses:
HOST_MODE: Lc, 00h
7
6
5
4
3
2
1
0
Access: FD
RW: 1
Bit Name
Device Mode[2:0]
This register is used to set the device operation mode.
Bit
2:0
Name
Device Mode
Description
These bits decide the CapSense controller device mode
000 Operating mode
001 LED configuration mode
010 Device configuration mode
011 Production line test mode
100 Debug Data mode
101 Not valid
110 Not valid
111 Not valid
2.2 LED_CONFIG
LED Effects Configuration register
Individual Register Names and Addresses:
LED_CONFIG: Lc, 01h
7
Access: FD RW: 0
Bit Name
Last Button
LED Effect
enable
6
5
4
RW: 0
RW: 0
Analog
Standby Mode LED
Voltage
brightness[5:4]
Output Enable
3
RW: 0
LED On time
Enable
2
RW: 0
Button Touch
LED effects
Enable
1
RW: 0
Power on
LED effects
enable
0
RW: 0
Power on
LED effects
Sequence
This register is used to enable/disable Button Touch LED Effects and Power-on LED Effects, and decides the power-on LED effect
sequence, LED ON Time enable/disable, sets the Standby Mode LED Brightness, analog voltage output enable/disable, and Last
Button LED Effect enable/disable.
Document Number: 001-74494 Rev. *A
Page 42 of 68