CYP15G0101DXB Datasheet, PDF (39/39 Pages) Cypress Semiconductor – Single-channel HOTLink II™ Transceiver

CYP15G0101DXB
CYV15G0101DXB
CYW15G0101DXB
Document History Page
Document Title: CYP(V)(W)15G0101DXB Single-channel HOTLink II™ Transceiver
Document Number: 38-02031
REV.
Orig. of
ECN NO. Issue Date Change
Description of Change
**
113123 05/20/02
TPS New Data Sheet
*A
119704 10/30/02
LNM Changed TXPER description
Changed TXCLKO description
Changed RXCKSEL to include RXCLKC+
Removed disparity reference from RFMODE
Removed the LOW setting for FRAMCHAR and related references
Removed references to ATM transport
Changed the I_OST boundary values
Changed V_ODIF and V_OLC for CML output
Changed the t_TXCLKR and t_TXCLKF min. values
Changed t_TXDS, t_TXDH, t_TREFDS, and t_TREFDH
Changed t_REFDV–, t_REFCDV–, and t_REFCDV+
Changed the JTAG ID from 0C804069 to 1C804069
Added a section for characterization and standards compliance
Changed I/O type of RXCLKC in I/O coordinates table
*B
122209 12/28/02
RBI Minor Change Document Control corrected Document History Page
*C
122546 02/13/03
CGX Changed Minimum tRISE/tFALL for CML
Changed tRXLOCK
Changed tDJ, tRJ
Changed tJTOL
Changed tTXLOCK
Changed tRXCLKH, tRXCLKL
Changed tTXCLKOD+, tTXCLKOD-
Changed Power Specs
Changed verbiage...Paragraph: Clock/Data Recovery
Changed verbiage...Paragraph: Range Control
Added Power-up Requirements
*D
124994 04/15/03
POT Changed CYP15G0101DXB to CYP(V)15G0101DXB type corresponding to
the Video-compliant parts
Reduced the lower limit of the serial signaling rate from 200 Mbaud to
195 Mbaud and changed the associated specifications accordingly
*E
128366 7/3/03
PDS Revised the value of t_RREFDV, t_{REFADV+ and} t_REFCDV+
*F
128835 7/31/03
KKV Minor change: corrections due to editorial error - old file used for *E revision
(reestablishing *D changes)
*G
131898 12/10/03
PDS When TXCKSEL = MID or HIGH, TXRATE = HIGH is an invalid mode. Made
appropriate changes to reflect this invalid condition
Removed requirement of AC coupling for Serial I/Os for interfacing with
LVPECL I/Os
Changed LFI to Asynchronous output
Expanded the CDR Range Controller’s permissible frequency offset
between incoming serial signaling rate and Reference clock from ±200-PPM
to ±1500-PPM (changed parameter t_REFRX)
*H
211461 See ECN KKV Minor change: Package diagram isn’t legible in pdf
*I
230621 See ECN LAR Updated package information in features list to reflect correct package
*J
338721 See ECN SUA Added CYW15G0101DXB part number for OBSAI RP3 compliance to
support operating data rate upto 1540 MBaud. Made changes to reflect
OBSAI RP3 and CPR compliance. Added Pb-Free Package option for all
parts listed in the datasheet.
Changed MBd to MBaud in SPDSEL pin description
Document #: 38-02031 Rev. *J
Page 39 of 39