English
Language : 

CY8C28243_13 Datasheet, PDF (38/80 Pages) Cypress Semiconductor – PSoC® Programmable System-on-Chip™
CY8C28243, CY8C28403, CY8C28413
CY8C28433, CY8C28445, CY8C28452
CY8C28513, CY8C28533, CY8C28545
CY8C28623, CY8C28643, CY8C28645
DC Type-E Operational Amplifier Specifications
The following tables list guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75 V to 5.25 V
and –40 °C  TA  85 °C, or 3.0 V to 3.6 V and –40 °C  TA  85 °C, respectively. Typical parameters apply to 5 V and 3.3 V at 25 °C
and are for design guidance only. The Operational Amplifiers covered by these specifications are components of the Limited Type E
Analog PSoC blocks.
Table 28. 5 V DC Type-E Operational Amplifier Specifications
Symbol
Description
VOSOA Input offset voltage (absolute value)
Min Typ
–
2.5
–
2.5
TCVOSOA Average input offset voltage drift
–
10
IEBOA[16] Input leakage current (Port 0 Analog Pins)
–
200
CINOA Input capacitance (Port 0 Analog Pins)
–
4.5
VCMOA
ISOA
Common mode voltage range
Amplifier supply current
0.0
–
–
10
Max Units
Notes
15
mV For 0.2 V < VIN < VDD – 1.2 V.
20
mV For VIN = 0 to 0.2 V and VIN > VDD
– 1.2 V.
–
V/°C
–
nA Gross tested to 1 A.
9.5
pF Package and pin dependent. Temp
= 25 °C.
VDD
V
30
A
Table 29. 3.3 V DC Type-E Operational Amplifier Specifications
Symbol
Description
VOSOA Input offset voltage (absolute value)
Min Typ
–
2.5
–
2.5
TCVOSOA Average input offset voltage drift
–
10
IEBOA[16] Input leakage current (Port 0 Analog Pins)
–
200
CINOA Input capacitance (Port 0 Analog Pins)
–
4.5
VCMOA
ISOA
Common mode voltage range
Amplifier supply current
0
–
–
10
Max Units
Notes
15
mV For 0.2 V < VIN < VDD – 1.2 V.
20
mV For VIN = 0 to 0.2 V and VIN > VDD –
1.2 V.
–
V/°C
–
nA Gross tested to 1 A.
9.5
pF Package and pin dependent. Temp =
25 °C.
VDD
V
30
A
DC Low Power Comparator Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75 V to 5.25 V
and –40 °C  TA  85 °C, 3.0 V to 3.6 V and –40 °C  TA  85 °C, or 2.4 V to 3.0 V and –40 °C  TA  85 °C, respectively. Typical
parameters apply to 5 V at 25 °C and are for design guidance only.
Table 30. DC Low Power Comparator Specifications
Symbol
Description
Min
VREFLPC Low power comparator (LPC) reference
0.2
voltage range
VOSLPC LPC voltage offset
–
ISLPC
LPC supply current
–
Typ
Max Units
–
VDD – 1
V
2.5
30
mV
10
40
A
Notes
Note
16. Atypical behavior: IEBOA of Port 0 Pin 0 is below 1 nA at 25 °C; 50 nA over temperature. Use Port 0 Pins 1-7 for the lowest leakage of 200 nA.
Document Number: 001-48111 Rev. *L
Page 38 of 80