BCM88335 Datasheet, PDF (32/140 Pages) Cypress Semiconductor – Single-Chip 5G Wi-Fi IEEE 802.11ac MAC/Baseband/ Radio with Integrated Bluetooth 4.1 for Automotive Applications

BCM88335 Data Sheet
Bluetooth Subsystem Overview
Section 4: Bluetooth Subsystem Overview
The Broadcom BCM88335 is a Bluetooth 4.1 + EDR-compliant, baseband processor/2.4 GHz transceiver. It
features the highest level of integration and eliminates all critical external components, thus minimizing the
footprint, power consumption, and system cost of a Bluetooth solution.
The BCM88335 is the optimal solution for any Bluetooth voice and/or data application. The Bluetooth subsystem
presents a standard Host Controller Interface (HCI) via a high-speed UART and PCM for audio. The BCM88335
incorporates all Bluetooth 4.1 features including Secure Simple Pairing, Sniff Subrating, and Encryption Pause
and Resume.
The BCM88335 Bluetooth radio transceiver provides enhanced radio performance to meet Automotive Grade
3 temperature applications and the tightest integration into automotive platforms. It is fully compatible with any
of the standard TCXO frequencies and provides full radio compatibility to operate simultaneously with GPS,
WLAN, and cellular radios.
The Bluetooth transmitter also features a Class 1 power amplifier with Class 2 capability.
Features
Major Bluetooth features of the BCM88335 include:
• Supports key features of upcoming Bluetooth standards
• Fully supports Bluetooth Core Specification version 4.1 + (Enhanced Data Rate) EDR features:
– Adaptive Frequency Hopping (AFH)
– Quality of Service (QoS)
– Extended Synchronous Connections (eSCO)—Voice Connections
– Fast Connect (interlaced page and inquiry scans)
– Secure Simple Pairing (SSP)
– Sniff Subrating (SSR)
– Encryption Pause Resume (EPR)
– Extended Inquiry Response (EIR)
– Link Supervision Timeout (LST)
• UART baud rates up to 4 Mbps
• Supports Bluetooth 4.1 for automotive applications
• Supports maximum Bluetooth data rates over HCI UART
• Multipoint operation with up to seven active slaves
– Maximum of seven simultaneous active ACL links
– Maximum of three simultaneous active SCO and eSCO connections with scatternet support
• Trigger Broadcom fast connect (TBFC)
• Narrowband and wideband packet loss concealment
Broadcom^®
September 23, 2015 • 88335-DS100-R
BROADCOM CONFIDENTIAL
Page 31