CY8CLED16_10 Datasheet, PDF (25/43 Pages) Cypress Semiconductor – EZ-Color™ HB-LED Controller

CY8CLED16
DC Analog PSoC Block Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ T_A ≤ 85°C, or 3.0V to 3.6V and -40°C ≤ T_A ≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and
are for design guidance only.
Table 18. DC Analog PSoC Block Specifications
Symbol
R_CT
C_SC
Description
Resistor Unit Value (Continuous Time)
Capacitor Unit Value (Switched Capacitor)
Min
–
–
Typ
12.2
80
Max
–
–
Units
kΩ
fF
Notes
DC POR, SMP, and LVD Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ T_A ≤ 85°C, or 3.0V to 3.6V and -40°C ≤ T_A ≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and
are for design guidance only.
Table 19. DC POR, SMP, and LVD Specifications
Symbol
V_PPOR0R
V_PPOR1R
V_PPOR2R
V_PPOR0
V_PPOR1
V_PPOR2
V_PH0
V_PH1
V_PH2
V_LVD0
V_LVD1
V_LVD2
V_LVD3
V_LVD4
V_LVD5
V_LVD6
V_LVD7
Description
Vdd Value for PPOR Trip (positive ramp)
PORLEV[1:0] = 00b
PORLEV[1:0] = 01b
PORLEV[1:0] = 10b
Vdd Value for PPOR Trip (negative ramp)
PORLEV[1:0] = 00b
PORLEV[1:0] = 01b
PORLEV[1:0] = 10b
PPOR Hysteresis
PORLEV[1:0] = 00b
PORLEV[1:0] = 01b
PORLEV[1:0] = 10b
Vdd Value for LVD Trip
VM[2:0] = 000b
VM[2:0] = 001b
VM[2:0] = 010b
VM[2:0] = 011b
VM[2:0] = 100b
VM[2:0] = 101b
VM[2:0] = 110b
VM[2:0] = 111b
V_PUMP0
V_PUMP1
V_PUMP2
V_PUMP3
V_PUMP4
V_PUMP5
V_PUMP6
V_PUMP7
Vdd Value for SMP Trip
VM[2:0] = 000b
VM[2:0] = 001b
VM[2:0] = 010b
VM[2:0] = 011b
VM[2:0] = 100b
VM[2:0] = 101b
VM[2:0] = 110b
VM[2:0] = 111b
Min Typ Max Units
2.91
V
–
4.39 –
V
4.55
V
2.82
V
–
4.39 –
V
4.55
V
–
92
–
mV
–
0
–
mV
–
0
–
mV
2.86
2.96
3.07
3.92
4.39
4.55
4.63
4.72
2.92
3.02
3.13
4.00
4.48
4.64
4.73
4.81
2.98^[5] V
3.08 V
3.20 V
4.08 V
4.57 V
4.74^[6] V
4.82 V
4.91 V
V
2.96 3.02 3.08 V
3.03 3.10 3.16 V
3.18 3.25 3.32 V
4.11 4.19 4.28 V
4.55 4.64 4.74 V
4.63 4.73 4.82 V
4.72 4.82 4.91 V
4.90 5.00 5.10 V
V
Notes
Notes
5. Always greater than 50 mV above PPOR (PORLEV = 00) for falling supply.
6. Always greater than 50 mV above PPOR (PORLEV = 10) for falling supply.
Document Number: 001-13105 Rev. *C
Page 25 of 43
[+] Feedback