CYP15G0201DXB Datasheet, PDF (1/46 Pages) Cypress Semiconductor – Dual-channel HOTLink II Transceiver

CYP15G0201DXB
CYV15G0201DXB
Dual-channel HOTLink II™ Transceiver
Features
• Dual channel transceiver for 195 to 1500 MBaud serial
signaling rate
— Aggregate throughput of 12 GBits/second
• Second-generation HOTLink^® technology
• Compliant to multiple standards
— ESCON, DVB-ASI, Fibre Channel and Gigabit
Ethernet (IEEE802.3z)
— CYV15G0201DXB also compliant to SMPTE 259M
and SMPTE 292M
— 8B/10B encoded or 10-bit unencoded data
• Selectable parity check/generate
• Selectable dual-channel bonding option
— One 16-bit channels
• Skew alignment support for multiple bytes of offset
• Selectable input/output clocking options
• MultiFrame™ Receive Framer
— Bit and Byte alignment
— Comma or full K28.5 detect
— Single- or multi-byte framer for byte alignment
— Low-latency option
• Synchronous LVTTL parallel interface
• Internal phase-locked loops (PLLs) with no external
PLL components
• Optional Phase-Align Buffer in transmit path
• Optional Elasticity Buffer in receive path
• Dual differential PECL-compatible serial inputs per
channel
— Internal DC-restoration
• Dual differential PECL-compatible serial outputs per
channel
— Source matched for 50Ω transmission lines
— No external bias resistors required
— Signaling-rate controlled edge-rates
• Compatible with
— fiber-optic modules
— copper cables
— circuit board traces
• JTAG boundary scan
• Built-In Self-Test (BIST) for at-speed link testing
• Per-channel Link Quality Indicator
— Analog signal detect
— Digital signal detect
• Low power 1.8W @ 3.3V typical
• Single 3.3V supply
• 196-ball BGA
• 0.25µ BiCMOS technology
Functional Description
The CYP(V)15G0201DXB^[1] Dual-channel HOTLink II™
Transceiver is a point-to-point or point-to-multipoint communi-
cations building block allowing the transfer of data over
high-speed serial links (optical fiber, balanced, and unbal-
anced copper transmission lines) at signaling speeds ranging
from 195- to 1500-MBaud per serial link.
The CYV15G0201DXB satisfies the SMPTE 259M and
SMPTE 292M compliance as per the EG34-1999 Pathological
Test Requirements.
10
10
10
10
Serial Links
Serial Links
10
10
10
10
Backplane or
Cabled
Connections
Figure 1. HOTLink II™ System Connections
Note:
1. CYV15G0201DXB refers to SMPTE 259M and SMPTE 292M compliant devices.
CYP15G0201DXB refers to devices not compliant to SMPTE 259M and SMPTE 292M pathological test requirements.
CYP(V)15G0201DXB refers to both devices.
Cypress Semiconductor Corporation • 3901 North First Street • San Jose, CA 95134 • 408-943-2600
Document #: 38-02058 Rev. *G
Revised January 26, 2004