CYBL1XX7X Datasheet, PDF (1/42 Pages) Cypress Semiconductor – Programmable Radio-on-Chip With Bluetooth Low Energy (PRoC™ BLE)

PRELIMINARY
PRoC™ BLE: CYBL1XX7X
Family Datasheet
Programmable Radio-on-Chip With
Bluetooth Low Energy (PRoC™ BLE)
General Description
PRoC™ BLE is a 32-bit, 48-MHz ARM^® Cortex™-M0 BLE solution with CapSense^®, 12-bit ADC, four timer, counter, pulse-width
modulators (TCPWM), Direct memory access (DMA), thirty-six GPIOs, two serial communication blocks (SCBs), LCD, and I²S.
PRoC™ BLE includes a royalty-free BLE stack compatible with Bluetooth^® 4.2 and provides a complete, programmable, and flexible
solution for HID, remote controls, toys, beacons, and wireless chargers. In addition to these applications, PRoC™ BLE provides a
simple, low-cost way to add BLE connectivity to any system.
Features
Bluetooth^® Smart Connectivity
■ Bluetooth 4.2 single-mode device
■ 2.4-GHz BLE radio and baseband with integrated balun
■ TX output power: –18 dBm to +3 dBm
■ Received signal strength indicator (RSSI) with 1-dB resolution
■ RX sensitivity: –92 dBm
■ TX current: 15.6 mA at 0 dBm
■ RX current: 16.4 mA
ARM Cortex-M0 CPU Core
■ 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit
multiply, operating at up to 48 MHz
■ 256-KB flash memory
■ 32-KB SRAM memory
■ Emulated EEPROM using flash memory
■ Watchdog timer with dedicated internal low-speed oscillator
(ILO)
■ Eight-channel direct memory access (DMA) controller
Ultra-Low-Power
■ 1.5-µA Deep-Sleep mode with watch crystal oscillator (WCO)
on
■ 150-nA Hibernate mode current with SRAM retention
■ 60-nA Stop mode current with GPIO wakeup
CapSense^® Touch Sensing with Two-Finger Gestures
■ Up to 36 capacitive sensors for buttons, sliders, and touchpads
■ One-finger gestures: finger tracking, scroll, inertial scroll,
edge-swipe, click, double-click
■ Two-finger gestures: scroll, inertial scroll, zoom-in, zoom-out
■ Cypress Capacitive Sigma-Delta (CSD) provides best-in-class
SNR (> 5:1) and liquid tolerance
■ Automatic hardware-tuning algorithm (SmartSense™)
Peripherals
■ 12-bit, 1-Msps SAR ADC with internal reference,
sample-and-hold (S/H), and channel sequencer
■ Ultra-low-power LCD segment drive for 128 segments with
operation in Deep-Sleep mode
■ Two serial communication blocks (SCBs) supporting I²C
(Master/Slave), SPI (Master/Slave), or UART
■ Four dedicated 16-bit TCPWMs
❐ Additional four 8-bit or two 16-bit PWMs
■ Programmable LVD from 1.8 V to 4.5 V
■ I²S Master interface
Clock, Reset, and Supply
■ Wide supply-voltage range: 1.9 V to 5.5 V
■ 3-MHz to 48-MHz internal main oscillator (IMO) with 2%
accuracy
■ 24-MHz external clock oscillator (ECO) without load
capacitance
■ 32-kHz WCO
Programmable GPIOs
■ 36 GPIOs configurable as open drain high/low,
pull-up/pull-down, HI-Z, or strong output
■ Any GPIO pin can be CapSense, LCD, or analog, with flexible
pin routing
Programming and Debug
■ 2-pin SWD
■ In-system flash programming support
Temperature and Packaging
■ Operating temperature range: –40 °C to +105 °C
■ Available in 56-pin QFN (7 mm × 7 mm) and 76-ball WLCSP
(3.52 mm × 3.91 mm) packages
PSoC^® Creator™ Design Environment
■ Easy-to-use IDE to configure, develop, program, and test a
BLE application
■ Option to export the design to Keil, IAR, or Eclipse
Bluetooth Low Energy Protocol Stack
■ Bluetooth Low Energy protocol stack supporting generic
access profile (GAP) Central, Peripheral, Observer, or
Broadcaster roles
❐ Switches between Central and Peripheral roles on-the-go
■ Standard Bluetooth Low Energy profiles and services for
interoperability
❐ Custom profile and service for specific use cases
Cypress Semiconductor Corporation • 198 Champion Court
Document Number: 001-95464 Rev. *H
• San Jose, CA 95134-1709 • 408-943-2600
Revised February 10, 2016