CMPA601C025D Datasheet, PDF (4/6 Pages) Cree, Inc – 25 W, 6.0 - 12.0 GHz, GaN MMIC, Power Amplifier

Block Diagram Showing Additional Capacitors for Operation Over 6.0 to 12.0 GHz
VG
RF_IN
C1
C3
C5
C12
VD
C11
C2
C4
VD1_B
VG1&2_B VD2_B
VG3_B VD3_B
VD1_A
VG1&2_A VD2_A
VG3_A VD3_A
RF_OUT
C13
C7
C9
C6
C8
C10
C14
Designator
C1,C2,C3,C4,C5,C6,C7,C8,C9,C10
C11,C12,C13,C14
Description
CAP, 51pF, +/-10%, SINGLE LAYER, 0.030”, Er 3300, 100V, Ni/
Au TERMINATION
CAP, 680pF, +/-10%, SINGLE LAYER, 0.070”, Er 3300, 100V,
Ni/Au TERMINATION
Quantity
10
4
Notes:
1 _{The input, output and decoupling capacitors should be attached as close as possible to the}
die- typical distance is 5 to 10 mils with a maximum of 15 mils.
2 _{The MMIC die and capacitors should be connected with 1 mil gold bond wires.}
Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc. Other trademarks, product and company names are the property of their respective
owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
4
CMPA601C025D Rev 1.0
Cree, Inc.
4600 Silicon Drive
Durham, North Carolina, USA 27703
USA Tel: [phone]
Fax: [phone]
Fax: [phone]
www.cree.com/RF