XP-L Datasheet, PDF (11/35 Pages) Cree, Inc – Cree XLamp XP-L LEDs

XLamp^® XP-L LED
Flux Characteristics - XP-L High Intensity (T_J = 85 °C) - Continued
Chromaticity
Kit CCT
Minimum Luminous Flux
(lm) @ 1050 mA
Flux
Code (lm) @
85 °C
Flux
(lm) @
25 °C*
U4 340
379
U3 320
357
U2 300
334
E8 2700 K T6 280
312
T5 260
290
T4 240
268
T3 220
245
80 CRI Typical
XPLAWT-H0-0000-
000LU40E8
XPLAWT-H0-0000-
000LU30E8
XPLAWT-H0-0000-
000LU20E8
Order Codes
80 CRI Minimum
85 CRI Minimum
XPLAWT-H0-0000-
000HU30E8
XPLAWT-H0-0000-
000HU20E8
XPLAWT-H0-0000-
000PT60E8
XPLAWT-H0-0000-
000PT50E8
XPLAWT-H0-0000-
000PT40E8
XPLAWT-H0-0000-
000PT30E8
90 CRI Minimum
XPLAWT-H0-0000-
000UT50E8
XPLAWT-H0-0000-
000UT40E8
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree^® and XLamp^® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL^® and the UR logo are registered trademarks of UL LLC.
11