XP-L Datasheet, PDF (1/35 Pages) Cree, Inc – Cree XLamp XP-L LEDs

Cree^® XLamp^® XP-L LEDs
Product family data sheet
XP-L High Density LED
XP-L High Intensity LED
Product Description
FEATURES
Table of Contents
XLamp^® XP-L LEDs are available in two
versions: High Density and High Intensity.
The XLamp^® XP-L High Density (HD)
LED is the highest performing discrete in
Cree’s High Density (HD) class of LEDs,
delivering the next generation of lumen
output and efficacy in the compact
3.45 mm x 3.45 mm XP footprint.
Cree’s HD LEDs, optimized to deliver
maximum lumen output in a small form
factor, enable lighting manufacturers
to improve the performance of any
lighting design, create smaller and less
expensive systems, and develop new
lighting solutions that were previously
not possible.
The XLamp XP-L High Intensity (HI) LED
is the first of Cree’s new class of High
Intensity (HI) LEDs optimized to deliver
maximum candela through secondary
optics. Built on Cree’s breakthrough SC5
Technology™ Platform, the XP-L HI LED
delivers 120 percent more candela than
the XP-L HD LED through the same optic.
The XP-L HI LED leverages the industry’s
highest single-die performance and a
new innovative primary optic design that
radically reduces the optical source size
to deliver both lumens and intensity.
• Available in white, 70-CRI white, 80‑CRI
white, 85 CRI white and 90‑CRI white
• ANSI‑compatible chromaticity bins
• Binned at 85 °C
• Maximum drive current: 3000 mA
• Low thermal resistance: 2.2 °C/W
• Wide viewing angle: 125° (XP-L High
Density), 115° (XP-L High Intensity)
• Unlimited floor life at
≤ 30 ºC/85% RH
• Reflow solderable - JEDEC J‑STD‑020C
• Electrically neutral thermal path
• RoHS and REACh compliant
• UL^® recognized component (E349212)
Characteristics.............................................2
Flux Characteristics - XP-L High Density....3
Flux Characteristics - XP-L High Intensity..8
Relative Spectral Power Distribution....... 12
Relative Flux vs. Junction Temperature... 12
Electrical Characteristics.......................... 13
Relative Flux vs. Current........................... 13
Relative Chromaticity vs. Current............. 14
Relative Chromaticity vs. Temperature.... 15
Typical Spatial Distribution....................... 16
Thermal Design......................................... 16
Performance Groups – Luminous Flux... 17
Performance Groups – Chromaticity....... 18
Cree’s Standard Chromaticity Regions
Plotted on the 1931 CIE Curve................. 21
Cree’s Standard Cool White Kits Plotted
on ANSI Standard Chromaticity
Regions...................................................... 23
Cree’s Standard Warm and Neutral
White Kits Plotted on ANSI Standard
Chromaticity Regions............................... 24
Cree’s Standard Chromaticity Kits........... 26
Bin and Order Code Formats.................... 27
Reflow Soldering Characteristics............. 28
Notes......................................................... 29
Mechanical Dimensions........................... 31
Tape and Reel............................................ 33
Packaging.................................................. 35
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree^® and XLamp^® are
registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL^® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]