EV6240 Datasheet, PDF (4/47 Pages) CML Microcircuits – Opto-Isolated serial interface capability

Evaluation Kit for CMX624/CMX644A
EV6240
1.2 Preliminary Information
1.2.1 Laboratory Equipment
The following laboratory equipment is needed to use this evaluation kit:
1.2.1.1 8-24V dc Power Supply
1.2.1.2 An IBM compatible PC; 66MHz ‘486 or better, running Microsoft Windows™ ’95/NT. The re-
programming software supplied (PICPROGB.EXE) runs most efficiently under DOS and cannot be
used with Windows NT.
1.2.2 Handling Precautions
Like most evaluation kits, this product is designed for use in office and laboratory environments. The
following practices will help ensure its proper operation.
1.2.2.1 Static Protection
This product uses low power CMOS circuits which can be damaged by electrostatic discharge.
Partially damaged circuits can function erroneously, leading to misleading results. Observe ESD
precautions at all times when handling this product.
1.2.2.2 Contents - Unpacking
Please ensure that you have received all of the items on the separate information sheet (EK6240) and
notify CML within 7 working days if the delivery is incomplete.
1.2.3 Approvals
This Evaluation Kit is not approved for direct or indirect connection to any public
telecommunication system. Users are advised to observe local statutory requirements which
may apply to this product.
4
© 1999 Consumer Microcircuits Limited
UM6240/3