CPC5710N Datasheet, PDF (4/9 Pages) Clare, Inc. – Phone Line Monitor (PLM) IC

CPC5710N
Parameter
Conditions
Minimum Typical Maximum
Unit
Comparator Threshold Characteristics
Comparator detection
threshold voltage
I_CM = 0
675
750
850
mV
Comparator detection
threshold voltage
I_CM = ±12 µA
488
750
1012
mV
Comparator hysteresis
voltage
I_CM = 0
300
375
450
mV
LIN/CMP Input Characteristics
Input low voltage
V_IL
-
-
0.8
V
Input high voltage
V_IH
2.0
-
-
V
Input high leakage
current (I_IH)
V_IH = 2.4 V
-
-
-120
µA
Input low leakage
current (I_IL)
V_IL = 0.4 V
-
-
-120
µA
Unless otherwise specified, minimum and maximum values are production testing requirements. Typical values are characteristic of the device and are the result of
engineering evaluations. Typical values are provided for information purposes only and are not part of the testing requirements.
1.3 Environmental Characteristics
Parameter
Conditions
Operating temperature
Operating humidity non-condensing
Minimum Typical Maximum
Unit
-40
-
+85
°C
5
-
95
%
1.4 Pinout
Pin Name
Description
1 VDD
Power supply
2 CMPOUT Comparator output, active low
3
LIN/CMP
Output select, low for linear output or high for
comparator output
4 LINOUT- Negative differential linear output
5 LINOUT+ Positive differential linear output
6 IN+
Positive differential input
7 IN-
Negative differential input
8 VSS
Ground
Figure 2. Package Pinout
1
VDD
VSS
8
2
CMPOUT IN-
7
3
LIN/CMP
IN+
6
4
LINOUT-LINOUT+
5
4
www.clare.com
Rev. 1.0 12/16/2002