CPC5710N Datasheet, PDF (3/9 Pages) Clare, Inc. – Phone Line Monitor (PLM) IC

1. Specifications
CPC5710N
1.1 Absolute Maximum Ratings
Parameter
Minimum Maximum Unit
V_DD
-0.3
6
V
Storage temperature
-40
+125
°C
Total package power
dissipation
300
mW
Logic input voltage
-0.3 V_DD + 0.3 V
Absolute maximum ratings are stress ratings. Stresses in excess of these
ratings can cause permanent damage to the device. Functional operation
of the device at these or any other conditions beyond those indicated in the
operational sections of this data sheet is not implied. Exposure of the
device to the absolute maximum ratings for an extended period may
degrade the device and affect its reliability.
1.2 Electrical Characteristics
V_DD = 5V, temperature = 25 °C unless otherwise indicated.
Parameter
Conditions
Minimum
DC Characteristics
Supply voltage, V_DD
3.0
Supply current, I_DD
-
AC Characteristics
Input Impedance
10
Input offset voltage, V_IO
-
Input offset current, I_IO No common-mode signal applied
-
Input offset current. I_IO With 12 µA of common-mode signal applied
-
Output DC bias level At LINOUT+ or LINOUT-, I_O @ 0.5 mA
0.9
Output Low Voltage
Swing
I_O = 0.5 mA
-
Gain, A_V
0 to 20 kHz
5.88
Common-mode
Using supplied application circuits, with common-mode
rejection ratio, CMRR current ≤ 12 µA, 0 to 120 Hz
40
Equivalent input noise
voltage, V_N
-
Typical
-
-
-
-
-
-
1.0
-
6
-
-90
Maximum
5.5
10
-
40
35
125
1.1
50
6.12
-
-
Unit
V
mA
MΩ
mV
nA
nA
V
mV
-
dB
dBm/Hz
Rev. 1.0 12/16/2002
www.clare.com
3