CPC5610 Datasheet, PDF (3/18 Pages) Clare, Inc. – LITELINK™ II Silicon Data Access Arrangement (DAA) IC

1. Electrical Specifications
CPC5610/CPC5611
1.1 Absolute Maximum Ratings
Parameter
Isolation Voltage
Continuous Tip to Ring
Current (R_ZDC = 5.2Ω)
Total Package Power Dis-
sipation
Operating temperature
Storage temperature
Soldering temperature
Minimum Maximum Unit
1500
-
V_RMS
150
mA
1
W
0
+85
°C
-40
+125
°C
-
+220
°C
Absolute maximum ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at these or
any other conditions beyond those indicated in the opera-
tional sections of this data sheet is not implied. Exposure of
the device to the absolute maximum ratings for an
extended period may degrade the device and affect its reli-
ability.
1.2 Performance
Parameter
DC Characteristics
Operating Voltage V_DD
Operating Current I_DD
Operating Voltage V_DDL
Operating Current I_DDL
On-hook Characteristics
Metallic DC Resistance
Longitudinal DC Resistance
Ring Signal Detect Level
Ring Signal Detect Level
Snoop Circuit Frequency Response
Minimum
3.0
-
2.8
-
10
10
5
28
166
Snoop Circuit CMRR
-
Ringer Equivalence
-
Longitudinal Balance
60
Off-Hook Characteristics
AC Impedance
-
Longitudinal Balance
40
Return Loss
-
Transmit and Receive Characteristics
Frequency Response
30
Trans-Hybrid Loss
-
Transmit and Receive Insertion Loss
-1
Average In-band Noise
-
Harmonic Distortion
-
Typical
-
-
-
10.5
-
-
-
-
-
-40
0.1B
-
600
-
26
-
36
0
-120
-80
Maximum
5.50
10
3.2
12
-
-
-
-
>4000
-
-
-
-
-
-
4000
-
1
-
-
Unit
V
mA
V
mA
MΩ
MΩ
V_RMS
V_RMS
Hz
dB
REN
dB
Ω
dB
dB
Hz
dB
dB
dBm/Hz
dB
Conditions
Host side
Host side
Line side, derived from tip and ring
Line side, drawn from tip and ring while off-hook
Tip to ring, 100 Vdc applied
150 Vdc applied from tip and ring to Earth ground
68 Hz ring signal applied to tip and ring
15 Hz ring signal applied across tip and ring
-3 dB corner frequency @ 166 Hz
120 V_RMS 60 Hz common mode signal across tip
and ring
Per FCC part 68.3
Tip to ring, using resistive termination application
circuit
Per FCC part 68.3
Into 600 Ω at 1800 Hz
-3 dB corner frequency 30 Hz
Into 600 Ω at 1800 Hz, with C18
30 Hz to 4 kHz
4 kHz flat bandwidth
-3 dBm, 600 Hz, 2^nd harmonic
Rev. 9.0
www.clare.com
3