340103102B12PFR116D1-4 Datasheet, PDF (7/19 Pages) C&K Components – Microminiature Connectors Type MTB1 Space

Microminiature Connectors Type MTB1 Space
Contacts
Plug (Male Contact)
L1
Insulator
Receptacle (Female Contact)
Min.
Max.
L1
0,25 (.010) 0,91 (.036)
L2
3,07 (.121) 3,33 (.131)
Insulator
L2
Position of the Contacts :
- Cavities 3 to N-2 for the Configuration ESA (*)
- Cavities 1 to N for the Configuration Standard (*)
Note (*) : Optional accessories (Polarisation Key or Latching) placed in contact cavities, the remaining contact position numbers being unchanged.
Guide Post / Polarization Key
Purpose - Guide Post : Pre-positionning of the contacts before mating. Mandatory (configuration ESA) or optional (configuration
Standard)
- Polarisation Key : Prevention against reversed position mating or mixing of similar variants. Optional (all configurations)
Plug
Receptacle
D1
D2
L1
L2
D1
0,90 ± 0,05 (.034 ± .002)
D2
0,81 ± 0,03 (.032 ± .001)
L1
5,40 min. (.213 min.)
L2
5,08 ± 0,25 (.200 ± .010)
Position of the Guide Posts (metal rods on the receptacle / holes in the insulator plug) :
- Cavities 2 and N-1 for the Configuration ESA
- Cavities 1 and N for the Configuration Standard (option)
Position of the Polarisation Key (metal rod on the receptacle / hole in the insulator plug) :
- Cavities 3 to N-2 for the Configuration ESA (option)
- Cavities 1 to N for the Configuration Standard (option)
142
Dimensions are shown in mm (inch)
Dimensions subject to change