340103102B12PFR116D1-4 Datasheet, PDF (2/19 Pages) C&K Components – Microminiature Connectors Type MTB1 Space

Microminiature Connectors Type MTB1 Space
Quality Levels
ESA/ESCC Quality Level.
The Dole plant (France) is qualified by ESA for the supply of Microminiature connectors Type MTB1, according to the ESCC Generic Specification
N° 3401, and to the applicable ESCC Detail Specification n° 3401/031.
First qualification obtained in 1986 (reniewed every 2 years).
Qualification certificate : 141 (MTB1).
Applications : Flight equipments, satellites, launchers (ESA requirements).
FR022 Quality Level.
"Commercial Space Grade".
C&K Connector Specification CS FR022, amendment to the ESCC Generic Specification n° 3401, for low cost products manufactured :
- in the same ESA qualified site
- through the same manufacturing and control processes
- with the same piece parts
- with lighter controls, documentation and traceability
Applications : Engineering models, ground equipments, testing, some flight equipments (no need for high requirements).
The connectors and accessories, supplied according to these 2 quality levels, are totally compatible, interchangeable, and intermateable, as they are
manufactured with the same piece parts (except the cables), in the same ESA qualified site.
Connector Styles
Description of the 3 Connector Styles proposed for the Space applications (Combinations of Configurations and Quality Levels).
Connector Style
Space ESA
Space FR022
Standard FR022
Configuration
ESA
ESA
Standard
Quality Level
ESA
FR022
FR022
Configuration characteristics.
Accessories
Cavity filled with epoxy
Guide Posts
Polarization key
Latching (even number of cavities)
Latching (odd number of cavities)
Configuration ESA
1 & N (mandatory)
2 & N-1 (mandatory)
3 to N-2 (option)
N/2 (option)
N/2 – 1 (option)
Configuration Standard
N.A.
1 & N (option)
1 to N (option)
N/2 (option)
N/2 – 1 (option)
137
Dimensions are shown in mm (inch)
Dimensions subject to change