340103102B12PFR116D1-4 Datasheet, PDF (19/19 Pages) C&K Components – Microminiature Connectors Type MTB1 Space

Microminiature Connectors Type MTB1 Space
CDRI
Description
The "Customer Design Request Information" document (CDRI) is an C&K Specification, describing a product supplied per specific customer
specification.
For CDRI : Consult factory.
Content
The CDRI document includes all the necessary data for :
- Customer use : characteristics of the product to be inserted into the Customer equipment
- C&K use : information for the manufacturing of the product
The main data are the following :
- Detailed description of the product
- Eventual applicable specifications or other documents
- Eventual drawings (Customer or C&K)
- Detailed amendments to the reference product (dimensions, piece parts, materials, cables)
- Detailed amendments to the manufacturing process (assembling, controls, marking, packaging, documentation)
- Quality level :
¤ ESA : Supply in accordance with the requirements of the ESCC Generic Specification n° 3401
¤ FR022 : Supply in accordance with the requirements of the C&K Specification CS FR022
¤ Other if applicable
- Allocated Descriptions and Part Numbers
- Allocated CDRI number
Process
- Identification of the Customer request (specification, drawing, technical note)
- Analysis and feasibility study
- Proposal of the best solution, with eventual modifications
- Finalization of the Customer request
- Eventual prototype
- Commercial offer
- Finalization of the CDRI document
Technical issues specific to the MTB1 Connectors
The amendments to the MTB1 Connectors described in this Catalogue can be made by the use of the following parameters :
- Other cable lengths
- Other PCB terminations
- Other cable references
- Cables AWG 30
- Coaxial cables, with conductor wired to a contact and shield wired to an adjacent contact or to an external cable
- Shielded
cables, with conductor wired to a contact and shield wired to an adjacent contact or to an external cable
- Solder Cup terminations
- Protection of the specific wiring areas by thermo-shrinkable kynar tubes
- Transversal holes in the insulators for mechanical fixing onto PCB
- Extra-rear potting for Insulators strengthening
154
Dimensions are shown in mm (inch)
Dimensions subject to change