801805000 Datasheet, PDF (21/24 Pages) C&K Components – Miscellaneous Components, Hardware & Technical Data

C&K Hardware
A SERIES
STOP RINGS
M SERIES
PART NO.
472900201
MATERIAL
Brass; Finish: Nickel plated
PART NO.
638100000 INNER-W/SHORT TAB
638101000 OUTER-W/LONG TAB
One each required for setting stops.
SWITCH ENCLOSURES
These enclosures make it easy to install HB and HG Series switches with electrical conduit, electrical tubing or armored cable.
The switch is inserted through the open top of the enclosure and is secured by two screws (furnished). The lower section of the
enclosure is completely removable and gives free access to the switch terminals. Switches having either the flat base or step base
can be used. Switches must be ordered separately.
TC-2 THRU-BOLT MOUNTING, 1/2-14 NPSM CONDUIT THREAD (Straight Thread)
TC-4 THRU-BOLT MOUNTING, 1/2-14 NPT CONDUIT THREAD (Tapered Thread)
L
TC-3 FLANGE MOUNTING, 1/2-14 NPSM CONDUIT THREAD (Straight Thread)
TC-5 FLANGE MOUNTING, 1/2-14 NPT CONDUIT THREAD (Tapered Thread)
ITT Industries
Cannon
L-26
www.ittcannon.com