801805000 Datasheet, PDF (18/24 Pages) C&K Components – Miscellaneous Components, Hardware & Technical Data

YM SERIES
NUTS (MOUNTING)
C&K Hardware
PART NO.
179090123
D & DM SERIES
MATERIAL
Brass, nickel plated standard. Other finishes available, consult Customer Service Center.
RECESSED BRACKET
PART NO.
057090100
MATERIAL
6/6 Nylon
ROCKER AND LEVER HANDLE SWITCH-PANEL MOUNTING HARDWARE
Panel mounting hardware for rocker and lever handle switches is
available separately. Mounting hardware consists of two screws,
two nuts, two standoffs and two lockwashers per switch, and is
available for panel thicknesses of 1/16, 3/32 and 1/8 inch.
See part numbers below.
ÎÎÎÎ
TYPICAL ASSEMBLY
SCREW
ÎÎÎÎ
PANEL THICKNESS
L
STAND-OFF
LOCKWASHER
NUT
7000 Series: J1, J2, J54, J64, J94 actuators.
T Series: J1, J6 actuators.
PART NO.
761101000
761102000
761103000
PANEL THK.
1/16 IN. (1,59)
3/32 IN (2,38)
1/8 IN. (3,18)
STANDOFF LENGTH
.295 (7,49)
.264 (6,71)
.233 (5,92)
7000 & 9000 Series: J4, J5 actuators.
PART NO.
775001000
775002000
775003000
PANEL THK.
1/16 IN. (1,59)
3/32 IN (2,38)
1/8 IN. (3,18)
STANDOFF LENGTH
.375 99,53)
.344 (8,74)
.312 (7,92)
9000 Series: J1, J2, J3, J50, J60, J90 actuators.
7000 Series: J3 actuators.
PART NO.
770601000
770602000
770603000
PANEL THK.
1/16 IN. (1,59)
3/32 IN (2,38)
1/8 IN. (3,18)
STANDOFF LENGTH
.295 (7,49)
.264 (6,71)
.233 (5,92)
7000 & 9000 Series: J10 actuators.
PART NO.
770701000
770702000
770703000
PANEL THK.
1/16 IN. (1,59)
3/32 IN (2,38)
1/8 IN. (3,18)
STANDOFF LENGTH
.295 (7,49)
.264 (6,71)
.233 (5,92)
MATERIAL
Screws, nuts, lockwashers: Stainless steel. Standoffs: Nylon, standard Aluminum available, consult Customer Service Center.
ITT Industries
Cannon
L-23
www.ittcannon.com