801805000 Datasheet, PDF (2/24 Pages) C&K Components – Miscellaneous Components, Hardware & Technical Data

C&K Hardware
AUXILIARY ACTUATORS
Basic precision HB Series switches, with any terminal style, can be used with these attachable actuators. As supplied, the
actuator is not assembled to the switch; the switch must be ordered separately. The actuator can be assembled to the switch
before mounting, or the actuator can be mounted on the panel or chassis and the switch installed after wiring. Assembly screws,
nuts and lockwashers are furnished.
BB-1 SEALED PLUNGER (For use with P0 actuator option.)
BB-2 SEALED PLUNGER (For use with PS sealed actuator option.)
Actuator assembly sealed to mounting surface
by flexible boot and o-ring seal.
BJ-1 OVERTRAVEL PLUNGER (For use with P0 actuator option.)
BJ-2 OVERTRAVEL PLUNGER (For use with PS sealed actuator option.)
L
Provides up to .250 in. total travel; mounting
by threaded bushing or two screws.
ITT Industries
Cannon
L-7
www.ittcannon.com