CS42432_07 Datasheet, PDF (9/58 Pages) Cirrus Logic – 108 dB, 192 kHz 4-In, 6-Out TDM CODEC

2. PIN DESCRIPTIONS - HARDWARE MODE
CS42432
TEST
TEST
MFREQ
TEST
RST
VLC
FS
VD
DGND
VLS
SCLK
MCLK
ADC_SDOUT
52 51 50 49 48 47 46 45 44 43 42 41 40
1
39
2
38
3
37
4
36
5
35
6
CS42432
34
7
33
8
32
9
31
10
30
11
29
12
28
13
27
14 15 16 17 18 19 20 21 22 23 24 25 26
AIN1+
AIN1-
VA
VQ
AGND
TSTO
TSTO
TSTO
TSTO
AOUT6-
AOUT6+
AOUT5+
AOUT5-
Pin Name
TEST
MFREQ
RST
VLC
FS
VD
VLS
SCLK
ADC_SDOUT
DAC_SDIN
AUX_LRCK
AUX_SCLK
AUX_SDIN
# Pin Description
1,2,4 Test (Input) - Must be tied high or low. Do not leave unconnected.
3
MCLK Frequency (Input) - Sets the required frequency range of the input Master Clock. See sec-
tion 5.4 for the appropriate settings.
5
Reset (Input) - The device enters a low power mode and all internal registers are reset to their
default settings when low.
6
Control Port Power (Input) - Determines the required signal level for the control port interface.
See “Digital I/O Pin Characteristics” on page 8.
7 Frame Sync (Input) - Signals the start of a new TDM frame in the TDM digital interface format.
8 Digital Power (Input) - Positive power supply for the digital section.
10
Serial Port Interface Power (Input) - Determines the required signal level for the serial port inter-
faces.
11 Serial Clock (Input) - Serial clock for the serial audio interface. Input frequency must be 256xFs.
13 Serial Audio Data Output (Output) - TDM output for two’s complement serial audio data.
14 DAC Serial Audio Data Input (Input) - Input for two’s complement serial audio data.
15
Auxiliary Left/Right Clock (Output) - Determines which channel, Left or Right, is currently active
on the Auxiliary serial audio data line.
16 Auxiliary Serial Clock (Output) - Serial clock for the Auxiliary serial audio interface.
17
Auxiliary Serial Input (Input) - The 42432 provides an additional serial input for two’s comple-
ment serial audio data.
DS673F2
9