CDB61581 Datasheet, PDF (9/16 Pages) Cirrus Logic – Universal Line Interface Unit

CDB61581
11.4. Transmitter Ram Configuration
When this command is selected, the software pops
up a window which displays the contents of the
AWG RAM (see Figure 2). Notice the six buttons
along the bottom of this window.
Modify Unit Interval brings up the Transmitter
RAM UI Config window, which allows the user to
edit the contents of the AWG registers. It is de-
scribed in the following section.
Read from File reads previously generated data
from a file.
Load to File writes the currently displayed data
into a file for later recovery using the Read from
File command.
Read from RAM reads the current data from the
AWG RAM and displays it in the current window.
Write to RAM writes the displayed data to the
AWG RAM. This must be done before exiting to
write the data to the device.
Exit returns control to the main CDB61581 menu.
It does not automatically write the data to the
CS61581.
Figure 2. Transmitter RAM Configuration Window
DS211DB2
9