CS42416 Datasheet, PDF (45/67 Pages) Cirrus Logic – 110 dB, 192kHz 6-Ch CODEC WITH PLL

CS42416
5.15 ADC Left Channel Gain (address 1Ch)
7
Reserved
6
Reserved
5
LGAIN5
4
LGAIN4
3
LGAIN3
2
LGAIN2
1
LGAIN1
0
LGAIN0
5.15.1 ADC LEFT CHANNEL GAIN (LGAINX)
Default = 00h
Function:
The level of the left analog channel can be adjusted in 1 dB increments as dictated by the Soft and
Zero Cross bits (SZC[1:0]) from +15 to -15 dB. Levels are decoded in two’s complement, as shown
in Table 16.
5.16 ADC Right Channel Gain (address 1Dh)
7
Reserved
6
Reserved
5
RGAIN5
4
RGAIN4
3
RGAIN3
2
RGAIN2
1
RGAIN1
0
RGAIN0
5.16.1 ADC RIGHT CHANNEL GAIN (RGAINX)
Default = 00h
Function:
The level of the right analog channel can be adjusted in 1dB increments as dictated by the Soft and
Zero Cross bits (SZC[1:0]) from +15 to -15dB. Levels are decoded in two’s complement, as shown in
Table 16.
Binary Code
001111
001010
000101
000000
111011
110110
110001
Decimal Value
+15
+10
+5
0
-5
-10
-15
Volume Setting
+15 dB
+10 dB
+5 dB
0 dB
-5 dB
-10 dB
-15 dB
Table 16. Example ADC Input Gain Settings
5.17 Interrupt Control (address 1Eh)
7
SP_SYNC
6
Reserved
5
DE-EMPH1
4
DE-EMPH0
3
INT1
2
INT0
1
Reserved
0
Reserved
5.17.1 SERIAL PORT SYNCHRONIZATION (SP_SYNC)
Default = 0
0 - DAC & ADC Serial Port timings not in phase
1 - DAC & ADC Serial Port timings are in phase
Function:
Forces the LRCK and SCLK from the DAC & ADC Serial Ports to align and operate in phase. This
function will operate when both ports are running at the same sample rate or when operating at dif-
ferent sample rates.
45