EP9301 Datasheet, PDF (12/41 Pages) Cirrus Logic – Entry-level ARM9 System-on-chip Processor

EP9301
Entry Level ARM9 System-on-Chip Processor
DC Characteristics
(T_A = 0 to 70° C; CVDD = VDD_PLL = 1.8; RVDD = 3.3 V;
All grounds = 0 V; all voltages with respect to 0 V unless otherwise noted)
High level output voltage
Low level output voltage
High level input voltage
Low level input voltage
High level leakage current
Low level leakage current
Parameter
Iout = -4 mA
Iout = 4 mA
Vin = 3.3 V
Vin = 0
(Note 4)
(Note 5)
(Note 5)
(Note 5)
(Note 5)
Symbol
V_oh
V_ol
V_ih
V_il
I_ih
I_il
Min
Max
0.85 × RVDD
-
0.65 × RVDD
−0.3
-
-
0.15 × RVDD
VDD + 0.3
0.35 × RVDD
10
-
-10
Unit
V
V
V
V
µA
µA
Parameter
Power Supply Pins (Outputs Unloaded), 25° C
Power Supply Current:
CVDD / VDD_PLL Total
RVDD
Low-Power Mode Supply Current
CVDD / VDD_PLL Total
RVDD
Min
Typ
Max
-
180
230
-
45
80
-
2
3.5
-
1.0
2
Unit
mA
mA
mA
mA
Note:
4. For open drain pins, high level output voltage is dependent on the external load.
5. All inputs that do not include internal pull-ups or pull-downs, must be externally driven for proper operation (See Table Q on
page 38). If an input is not driven, it should be tied to power or ground, depending on the particular function. If an I/O pin is not
driven and programmed as an input, it should be tied to power or ground through its own resistor.
12
©Copyright 2005 Cirrus Logic (All Rights Reserved)
DS636PP5